7.0.2 Mobile Link の推奨 ODBC ドライバ

The MobiLink server uses ODBC 3.0 to connect to the consolidated database. The information presented here is intended to help you choose which ODBC driver to use with your consolidated database.

In theory MobiLink should be able to use as a consolidated database any ODBC 3.0 data source that supports the optional ODBC functionality required by MobiLink, but in practice ODBC implementations vary widely. Different ODBC drivers have different capabilities, and the MobiLink server attempts to adapt to these by querying the driver. Typically the driver also has behavior (or bugs) that can’t be detected by querying the driver. For these we test the driver in an attempt to find viable workarounds. Some workarounds are used for different consolidated database vendors, while others are specific to a vendor and even a specific version.

Once we have identified a set of workarounds that are required for a driver, we update the MobiLink server so that it recognizes the version of the driver, and automatically associates the set of workarounds with that version.

For some ODBC drivers, we are not able to develop viable workarounds for all issues. In these cases, you still may be able to use the driver if your synchronizations do not require the missing driver functionality.

For ease of testing, and to allow MobiLink to apply workarounds to drivers that it does not recognize, the MobiLink workarounds can be set by the undocumented –hw command-line switch. This switch and its associated workarounds are not documented because indiscriminate use of workarounds could cause data corruption or software errors.

Note that after workaround sets are identified, we can make future versions of MobiLink apply the associated hidden workaround switches automatically. Thus if you chose to use hidden workarounds directly, you may not need them with newer versions of the MobiLink server. Continued use of hidden switches with a newer MobiLink may even cause problems or reduced performance.

Driver testing

We use two types of testing of ODBC drivers with MobiLink.

The first, referred to as MLR, is a comprehensive suite of regression tests that exercise synchronization functionality. If some specific MLR tests fail, the driver may still be suitable as long as your synchronizations do not rely on the functionality that failed. For example, if the only MLR tests that fail are for synchronization of LONG BINARY data, then the driver may still be suitable for you if you are not using MobiLink to synchronize LONG BINARY data.

The second type of testing, referred to as MLB, is high-load testing involving many clients synchronizing simultaneously with a MobiLink server running on a multi-processor computer. We have found that some drivers will fail with multiple simultaneous connections or under high load while running on multiple processors. In these cases, you may need to restrict MobiLink to run on a single processor (via the –zt 1 switch) or limit it to a single worker thread (via the –w 1 switch).

Recommended Drivers

As a result of our testing, we recommend the following ODBC drivers for use with version 7.0.2 of the MobiLink server. Unless specified otherwise, the recommendations refer to the Windows version of MobiLink.

The following sections list the recommended ODBC driver for different types of consolidated database. In some cases, alternative drivers are also listed. Click on one of the consolidated DBMS types below to see recommended driver information for using MobiLink with that type of DBMS:

Sybase Adaptive Server Anywhere (ASA)

Sybase Adaptive Server Enterprise (ASE)

Oracle 8 and 8i

Microsoft SQL Server 7 and 2000

IBM DB2 UDB 5.2

Sybase Adaptive Server Anywhere (ASA)

Driver Adaptive Server Anywhere 7.0
Version 7.0.2
Status Recommended for use with MobiLink.
Client s/w None.
OS Win32, Solaris, Linux
Workarounds applied by MobiLink None
Other required workarounds None
Pros All MLR and MLB tests pass.
Cons None.
Notes The MLR tests all pass with the ODBC driver included with ASA, and the MLB testing shows no problems with multiple clients simultaneously synchronizing through a MobiLink server running on a multi-processor computer.

ASA 6.0.4, 7.0.0 and 7.0.1 drivers also work with MobiLink without additional workarounds.

Sybase Adaptive Server Enterprise (ASE)

Driver Sybase ASE ODBC Driver
Version 3.50.00.10
Status Recommended for use with MobiLink.
Client s/w Open Client 12.0
OS Win32, Solaris
Workarounds applied by MobiLink –hwf+i+j+t+v+w+A+
Other required workarounds -hwC+
Pros All MLR and MLB tests pass.
Cons This driver’s upload performance can degrade significantly when there are many download_cursor and download_delete_cursor scripts that contain many columns. The -hwC+ workaround prevents this problem.
Notes For ASE version 11.9.2 or 12, we recommend using the 12.0 Open Client software and the Sybase ASE ODBC driver version 3.50.00.10.
Driver Merant DataDirect Connect ODBC driver for Sybase
Version 3.60sp2 (3.60.00.15 in ODBC Administrator)
Status Recommended for use with MobiLink with caveats.
Client s/w Open Client 12.0
OS Win32, Solaris
Workarounds applied by MobiLink None
Other required workarounds –hwf+i+j+t+v+w+A+
Pros Most MLR tests and all MLB tests pass.
Cons The only MLR failures are for “out of range” errors when trying to download values of -(2^63) or -(2^63)-1 into a BIGINT column in the remote database. This driver problem has been reported to Merant.
Notes For Win32, Merant offers two version 3.6 drivers for ASE; one that requires Open Client software and one that directly implements the ASE TDS wire-level protocol. The information above refers to the former. The wire-protocol version is faster, but we find that it will eventually exhaust ASE memory in the MLB tests unless the driver is configured to use the “Partial” option for preparing statements. Unfortunately, with the “Partial” option enabled, we find that several MLR tests fail.

Thus we do not currently recommend using the Merant wire-protocol driver for ASE. (The version 3.70 wire-protocol driver, which is available for Win32, Solaris and Linux, has the same problem.) The MLR and MLB tests pass with the driver that requires the client (it doesn’t have “ASE” in the name listed in the ODBC Manager) when the statement preparation is set to use the “Full” option.

Oracle 8 and 8i

We have found the greatest variability between driver versions with Oracle’s ODBC drivers. In many cases, new bugs have appeared in subsequent versions of the ODBC driver so if you have an Oracle ODBC driver that works for you, then we recommend that you continue to use it. Most Oracle ODBC drivers seem to have multi-threading issues.

Driver Oracle ODBC Driver
Version 8.0.5.8.0
Status Recommended for use with MobiLink with caveats.
Client s/w Net8 8.0.5.0.0 or 8.0.5.0.3
OS Win32
Workarounds applied by MobiLink –hwd+h+k+r+s+
Other required workarounds –zt 1 (to restrict execution to a single processor)
Pros Passes MLR tests.
Passes MLB tests when run on a single processor.
Cons Fails MLB tests when run on multiple processors.
Notes The most functional ODBC driver from Oracle that we have tested is version 8.0.5.8.0, when used with Net8 version 8.0.5.0.0. This driver passes all MLR tests, and as long as it is not run on multiple processors it also works for the MLB tests. When run under high load from multiple connections on multiple processors, an application exception will eventually occur in an Oracle ODBC driver DLL. Typically this occurs as an unknown exception (0xebad0000) in ORA805.DLL (which is called from OCI.DLL). On a multiple-processor computer, you can restrict MobiLink (and hence the ODBC driver) to execute on a single processor by using the –zt 1 MobiLink command-line option.

The problem with multiple processors also happens when the Net8 client is updated to version 8.0.5.0.3.

Driver Merant DataDirect Connect ODBC driver for Oracle8
Version 3.70.00.00
Status Recommended for use with MobiLink with caveats.
Client s/w Net8 8.1.7.0.0
OS Win32, Solaris
Workarounds applied by MobiLink None
Other required workarounds –hwf+i+k+n+w+A+
Pros Passes most MLR tests.
Passes MLB tests.
Cons Some MLR tests involving LONG VARCHAR columns failed.
Driver has problems with double-hyphen comments and unnecessary semicolons.
MLR failures also occur with “out of range” errors when trying to download values of -(2^63) or -(2^63)-1 into a BIGINT column in the remote database. This driver problem has been reported to Merant.
Notes For some of the MLR tests, the “SQLDescribeParam” option needs to be enabled for the driver, but it is not needed for the MLB tests.

In the MLB tests, the Merant driver is significantly faster than the Oracle 8.0.5.8 driver for synchronizing downloads but somewhat slower for uploads. The driver works in the MLB tests under high load on multiple processors, but the performance benefit of using multiple processors is small: we found that throughput decreased somewhat when using more than two processors.

Driver Oracle ODBC Driver
Version 8.0.5.10.0
Status Not recommended for use with MobiLink.
Client s/w Net8 8.0.5.0.0
OS Win32
Workarounds applied by MobiLink –hwd+f+h+k+p+r+s+
Other required workarounds –hwp-q+
Pros Passes most MLR tests.
Cons Fails a few MLR tests with “ORA-933: SQL command not properly ended” errors.
Fails MLR tests for LONG VARCHAR and LONG BINARY with “ORA-24801: illegal parameter value in OCI lob function” errors.
Fails MLB tests with “option value changed” and “Invalid attribute/option identifier <0>” errors.
Notes We were unable to determine the cause of the ORA-933 errors in the MLR tests.

With version 8.0.5.10.0 of the Oracle ODBC driver, the MLB tests could not be run at all. The tests failed from driver errors about invalid attribute/option identifier and changed option values. The same problem occurs with version 8.0.5.9.0 of the Oracle ODBC driver.

We have not been able to determine a viable workaround for these issues, but we are aware that some customers are able to use this driver successfully.

Driver Oracle ODBC Driver
Version 8.1.6.2.0
Status Not recommended for use with MobiLink.
Client s/w Net8 8.1.6.0.0
OS Win32
Workarounds applied by MobiLink None
Other required workarounds –hwd+r+ –s 1
Pros Passes most MLR tests.
Cons Fails MLR tests for LONG VARCHAR and LONG BINARY columns.
MLR test with REAL columns failed because values uploaded were slightly different when downloaded.
Need to disable bulk fetching (via –s 1). Since rows must be fetched one at a time download performance is adversely affected.
Notes MLB tests have not been performed with this driver. It may have multi-threaded problems as do all the Oracle ODBC drivers for which we have been able to do MLB testing.
Driver Oracle ODBC Driver
Version 8.1.7.0.0
Status Not recommended for use with MobiLink.
Client s/w Net8 8.1.7.0.0
OS Win32
Workarounds applied by MobiLink None
Other required workarounds –hwd+h+k+r+
Pros Passes most MLR tests.
Cons Fails MLR tests for LONG VARCHAR and LONG BINARY with “ORA-24801: illegal parameter value in OCI lob function” errors.
Fails MLB tests with “option value changed” and “Invalid attribute/option identifier <0>” errors.
Notes With version 8.1.7.0.0 of the Oracle ODBC driver (and Net8 8.1.7.0.0), the MLB tests could not be run at all. The tests failed from driver errors about invalid attribute/option identifier and changed option values.

We have not been able to determine a viable workaround for this issue, but we are aware that some customers are able to use this driver successfully.

Driver Oracle ODBC Driver
Version 8.1.7.2.0
8.1.7.3.0
Status Not recommended for use with MobiLink.
Client s/w Net8 8.1.7.0.0
OS Win32
Workarounds applied by MobiLink None
Other required workarounds –hwd+h+k+n+r+
Pros Passes most MLR tests. Passes MLB tests when run with a single MobiLink worker thread.
Cons Fails many MLR tests when executing a stored procedure that is part of the setup for several tests.
Fails MLB tests with conversion errors when run with multiple MobiLink worker threads.
Notes Version 8.1.7.2.0 of the Oracle ODBC driver (with Net8 8.1.7.0.0) tends to fail with multiple simultaneous synchronizations even when running only on a single processor. Therefore we do not recommend it. The failure typically occurs as a conversion error (“ORA-01461 can bind a LONG value only for insert into a LONG column” or “ORA-01460 unimplemented or unreasonable conversion requested”).

You can restrict it to work on only one synchronization at a time by limiting the number of MobiLink worker threads to one (via –w 1), but this will seriously limit throughput performance.

Microsoft SQL Server 7 and 2000

Important: With any version of SQL Server, you should specify “SET NOCOUNT ON” as the first statement in all stored procedures or SQL batches executed via ODBC. Without this option, a “number of rows affected” message is sent to MobiLink for each statement executed. If you are doing a relatively large number of inserts, updates, and select into statements, these messages can fill network buffers resulting in data being lost without any warning.

Driver Microsoft SQL Server ODBC Driver
Version 3.60.03.19 (for SQL Server 7)
2000.80.194.00 (for SQL Server 2000)
Status Recommended for use with MobiLink.
Client s/w None
OS Win32
Workarounds applied by MobiLink –hwq+ (for MSS 7)
–hwq+C+ (for MSS 2000)
Other required workarounds None
Pros Passes MLR and MLB tests.
Cons None
Notes The MLR tests all pass with the ODBC drivers included with Microsoft SQL Server 7 and 2000. MLB tests run with these drivers when the NOCOUNT option was set for all stored procedures.

IBM DB2 UDB 5.2

Driver IBM DB2 UDB 5.2 ODBC driver
Version Driver is included with IBM DB2 UDB 5.2.
Status Recommended for use with MobiLink.
Client s/w 5.02.0000
OS Win32
Workarounds applied by MobiLink –hwf+h+n+u+
Other required workarounds None
Pros Passes MLR tests.
Cons None
Notes MLB tests have not been run with this driver.